In order to successfully complete this assignment, you must do the required reading, watch the provided videos, and complete all instructions. The embedded survey form must be entirely filled out and submitted on or before 11:59pm on the day before class. Students must come to class the next day prepared to discuss the material covered in this assignment.
Pre-Class Assignment: Robotics and Reference Frames¶
Image from: www.fanuc.com
Goals for today's pre-class assignment¶
Reference: https://studywolf.wordpress.com/2013/08/21/robot-control-forward-transformation-matrices/
✅ **QUESTION:** Matrix $A$ is of size ($n_1 \times m_1$) and matrix $B$ is of size ($n_2 \times m_2$). What must be true about the dimensions in order to multiply $A \times B$?
Put your answer here
✅ **QUESTION:** The following transformation matrix will move points in $R^n$ dimensional space. What is $n$?
$$ \left[ \begin{matrix} \sin{(\theta)} & -\cos{(\theta)} & 0 & d_x \\ \cos{(\theta)} & \sin{(\theta)} & 0 & d_y \\ 0 & 0 & 1 & d_z \\ 0 & 0 & 0 & 1 \end{matrix} \right] $$Put your answer here
✅ **QUESTION:** The above matrix rotates around which axis?
Put your answer here
✅ **QUESTION:** In the above matrix, how do the scalar values $d_x, d_y, d_z$ influence the transformation?
Put your answer here
✅ **QUESTION:** Compute $2u+3v$ for vectors $u = (1,2, 6)$ and $v = (4, -1, 3)$.
Put your answer here
✅ **QUESTION:** What is a homogeneous system of linear equations?
Put your answer here
2. 2D Forward Kinematics¶
This robot can move in the $x-y$ plane. We can represent the configuration of the robot in its "Joint Space" by knowing the two joint angles or $[a_1,a_2]$. However what we would like is to represent the location of the end of the robot (often called the "end effector" or "hand") in "world" coordinates (i.e. $x-y$ coordinate system).
Today, we will use Linear Algebra and simple transformation matrices to try and calculate how to go from "joint" coordinates to "world" coordinates.
from IPython.display import YouTubeVideo
YouTubeVideo("aCohcLYrYcY",width=640,height=360, cc_load_policy=True)
Single axis Robot¶
The following code draws a simple single axis (single joint) robot with its joint centered at the origin and its initial angle of zero with an robot arm length of 4 "units" long.
%matplotlib inline
import matplotlib.pylab as plt
import numpy as np
from ipywidgets import interact
import sympy as sym
sym.init_printing(True)
plt.scatter(4,0, s=200, facecolors='none', edgecolors='r') #plot end effector
plt.scatter(0,0, s=200, facecolors='r', edgecolors='r') # plot origin
plt.plot([0,4],[0,0]) #plot blue line for arm
plt.axis('square')
plt.xlim([-5.5,5.5])
plt.ylim([-5.5,5.5])
A 2D rotation matrix around the origin is defined as the following:
$$ \left[ \begin{matrix} x_{end} \\ y_{end} \end{matrix} \right] = \left[ \begin{matrix} \cos(a) & -\sin(a) \\ \sin(a) & \cos(qa \end{matrix} \right] \left[ \begin{matrix} x_{start} \\ y_{start} \end{matrix} \right] $$The following rotation matrix will rotate the point $45^o$ around the origin:
p = [[4],[0]]
a1=np.pi/4
R = np.matrix([[np.cos(a1), -np.sin(a1)], [np.sin(a1), np.cos(a1)]])
p2 = R*p
x1 = p2[0,0]
y1 = p2[1,0]
plt.scatter(x1,y1, s=200, facecolors='none', edgecolors='r') #plot end effector
plt.scatter(0,0, s=200, facecolors='r', edgecolors='r') # plot origin
plt.plot([0,x1],[0,y1]) #plot blue line for arm
plt.axis('square')
plt.xlim([-5.5,5.5])
plt.ylim([-5.5,5.5])
sym.Matrix(R)
The following code uses the Jupyter interact function and numpy to make an interactive view of the above. This lets us change the value of the rotation motor and see how it changes the robot. The input to the function is the axis angle and the output is the $x-y$ coordinates.
Note: it can take some time for the interaction to catch up. Try moving the slider slowly...
def Robot_Simulator(q1=0):
a1 = q1/180 * np.pi
p0 = np.matrix([4,0]).T
p = p0
J1 = np.matrix([[np.cos(a1), -np.sin(a1)], [np.sin(a1), np.cos(a1)]])
p = np.concatenate( ( J1*p, np.matrix([0,0]).T), axis=1 )
plt.scatter(p[0,:].tolist()[0],p[1,:].tolist()[0], s=200, facecolors='none', edgecolors='r')
plt.scatter(0,0, s=200, facecolors='r', edgecolors='r')
plt.plot(p[0,:].tolist()[0],p[1,:].tolist()[0])
plt.axis('square')
plt.xlim([-5.5,5.5])
plt.ylim([-5.5,5.5])
ax = plt.gca()
plt.show()
return([ p[0,0], p[1,0] ])
p = interact(Robot_Simulator, q1=(-180,180,2));
✅ **DO THIS:** Inspect the above code.
✅ **QUESTION:** Which line of the code defines the transformation matrix for the robot joint?
Put your answer to the above questin here.
✅ **QUESTION:** Which line of code defines the length of the robot arm?
(Note you can turn line numbers on and off in jupyterhub. Use the menu at the top to figure out how.)
Put your answer to the above question here
Notice it has two joints $a_1$ and $a_2$ and offset lengths of $d_1$, $d_2$ and $d_e$. The joint space for this robot is just its angles $[a_1, a_2]$. However, what we want is to know the location of end effector point $p_e$ at the gripper in the "world" reference frame, which the bottom most axies "on the ground".
At each joint, we can define a reference frame that rotates and then transforms the origin to the ealier joint. The forward transformation matrices capture the relationship between the reference frames of different links of the robot.
For example, We can move from the base motor, or $p_1$, reference frame to the world, or $p_w$, reference frame using the following equations:
$$ p_w = \left[ \begin{matrix} \cos(a_1) & -\sin(a_1) \\ \sin(a_1) & \cos(a_1) \end{matrix} \right] p_1 + \left[ \begin{matrix} 0 \\ d_1 \end{matrix} \right]. $$The equation shown above are a little tricky to work with because the$ \left[ \begin{matrix} 0 \\ d_1 \end{matrix} \right] $ part makes the equation non-linear (if you don't believe me? Remember the rules for making a function linear and apply them and see for yourself). However, there is an easy trick in Linear Algebra to convert the above to one big linear matrix. This trick requires us to keep an extra 1 (one) for each point but makes the math work out nicely. Basically the trick works as follows:
$$ \left[ \begin{matrix} x_w \\ y_w \\ 1 \end{matrix} \right] = \left[ \begin{matrix} cos(a_1) & -sin(a_1) & 0 \\ sin(a_1) & cos(a_1) & d_1 \\ 0 & 0 & 1 \end{matrix} \right] \left[ \begin{matrix} x_1 \\ y_1 \\ 1 \end{matrix} \right] $$Let's call the transformation matrix for Joint 1, $J_1$, and we can rewrite the equations as follows:
$$p_1 = J_1p_2$$✅ **DO THIS** On your own, write out the above matrix multiplication and convince yourself that it is the same as the one above.
Now, we can move from the $p_2$ reference frame to the $p_1$ reference frame basically the same equation:
$$ \left[ \begin{matrix} x_1 \\ y_1 \\ 1 \end{matrix} \right] = \left[ \begin{matrix} cos(a_2) & -sin(a_2) & d_2 \\ sin(a_2) & cos(a_2) & 0 \\ 0 & 0 & 1 \end{matrix} \right] \left[ \begin{matrix} x_2 \\ y_2 \\ 1 \end{matrix} \right] $$For the last step we can do a simple linear transpose from the end effector $p_e$ reference frame to the $p_2$ reference frame:
$$ \left[ \begin{matrix} x_2 \\ y_2 \\ 1 \end{matrix} \right] = \left[ \begin{matrix} 1 & 0 & d_2 \\ 0 & 1 & 0 \\ 0 & 0 & 1 \end{matrix} \right] \left[ \begin{matrix} x_e \\ y_e \\ 1 \end{matrix} \right] $$If we call each transformation matrix $J_1, J_2, J_e$ then hopefully you can see that we can string these transformation matrices together such that we get a single transform from the end effector all the way back to the world coordinates as follows:
$$p_w = J_1J_2J_ep_e$$Let's see what this looks like in Python. I am going to use numpy. The plotting gets a little awkward but hopefully it makes sense.
First, lets initialize the variables to some discreet numbers:
%matplotlib inline
import matplotlib.pylab as plt
import numpy as np
from ipywidgets import interact
#Inicial state
a1 = 0
a2 = 0
#Lenths of the offsets
d1 = 0.5
d2 = 3
de = 3
Next, I am going to define a set of points in the end effector coordinate system. These points are picked to form a sort of "C" shaped designed to look sort of like an end effector. I will plot them to help show you what I mean:
#Points needed to define a square
pe = np.matrix([[1, 0.5, 1],[0,0.5,1],[0,-0.5, 1],[1,-0.5, 1],[0,-0.5, 1],[0,0, 1]]).T
p = pe
plt.scatter(p[0,:].tolist()[0],p[1,:].tolist()[0], s=20, facecolors='none', edgecolors='r')
plt.scatter(0,0, s=20, facecolors='r', edgecolors='r')
plt.plot(p[0,:].tolist()[0],p[1,:].tolist()[0])
plt.axis('scaled')
plt.xlim([-5.5,5.5])
plt.ylim([-5.5,5.5])
The next step is to apply the $J_e$ transformation matrix to the gripper points which will put them in the $p_2$ coordinate system. Once the points are transposed the code concatenates the origin (0,0) onto the list of points so we can part of the robot arm in the plot:
Je = np.matrix([[1, 0, de],
[0, 1, 0],
[0,0,1]])
p = np.concatenate( ( Je*p, np.matrix([0,0,1]).T), axis=1 )
plt.scatter(p[0,:].tolist()[0],p[1,:].tolist()[0], s=20, facecolors='none', edgecolors='r')
plt.scatter(0,0, s=20, facecolors='r', edgecolors='r')
plt.plot(p[0,:].tolist()[0],p[1,:].tolist()[0])
plt.axis('scaled')
plt.xlim([-5.5,5.5])
plt.ylim([-5.5,5.5])
We do this again. Apply the $J_2$ transformation matrix to put the points into the $p_1$ coordinate system, concatenate the origin and plot the results.
J2 = np.matrix([[np.cos(a2), -np.sin(a2), 0],
[np.sin(a2), np.cos(a2), d2],
[0,0,1]])
p = np.concatenate( ( J2*p, np.matrix([0,0,1]).T), axis=1 )
plt.scatter(p[0,:].tolist()[0],p[1,:].tolist()[0], s=20, facecolors='none', edgecolors='r')
plt.scatter(0,0, s=20, facecolors='r', edgecolors='r')
plt.plot(p[0,:].tolist()[0],p[1,:].tolist()[0])
plt.axis('scaled')
plt.xlim([-5.5,5.5])
plt.ylim([-5.5,5.5])
We do it yet again. Apply the $J_1$ transformation matrix which will put the points in the $p_w$ coordinate system, concatenate the origin and plot the results. The result is a skeletal frame representing our robot.
J1 = np.matrix([[np.cos(a1), -np.sin(a1), 0],
[np.sin(a1), np.cos(a1), d1],
[0,0,1]])
p = np.concatenate( ( J1*p, np.matrix([0,0,1]).T), axis=1 )
plt.scatter(p[0,:].tolist()[0],p[1,:].tolist()[0], s=20, facecolors='none', edgecolors='r')
plt.scatter(0,0, s=20, facecolors='r', edgecolors='r')
plt.plot(p[0,:].tolist()[0],p[1,:].tolist()[0])
plt.axis('scaled')
plt.xlim([-8,8])
plt.ylim([-8,8])
✅ **DO THIS:** Modify the rotation variables a1 and a2 in the above code and see if the new robot configuration looks right. HINT make sure your angles are in radians.
The following is the same code as above but put into an interactive function to make the code easier to play with:
from ipywidgets import interact
def Robot_Simulator(q1=0,q2=-0):
a1 = q1/180 * np.pi
a2 = q2/180 * np.pi
d1 = 0.5
d2 = 3
de = 3
target = np.matrix([-3,2, 1])
print(target)
pe = np.matrix([[1, 0.5, 1],[0,0.5,1],[0,-0.5, 1],[1,-0.5, 1],[0,-0.5, 1],[0,0, 1]]).T
Je = np.matrix([[1, 0, de],
[0, 1, 0],
[0,0,1]])
p = np.concatenate( ( Je*pe, np.matrix([0,0,1]).T), axis=1 )
J2 = np.matrix([[np.cos(a2), -np.sin(a2), 0],
[np.sin(a2), np.cos(a2), d2],
[0,0,1]])
p = np.concatenate( ( J2*p, np.matrix([0,0,1]).T), axis=1 )
J1 = np.matrix([[np.cos(a1), -np.sin(a1), 0],
[np.sin(a1), np.cos(a1), d1],
[0,0,1]])
p = np.concatenate( ( J1*p, np.matrix([0,0,1]).T), axis=1 )
plt.scatter(p[0,:].tolist()[0],p[1,:].tolist()[0], s=20, facecolors='none', edgecolors='r')
plt.scatter(0,0, s=20, facecolors='r', edgecolors='r')
plt.plot(p[0,:].tolist()[0],p[1,:].tolist()[0])
plt.plot(target[0,0], target[0,1],'*')
plt.axis('scaled')
plt.xlim([-8,8])
plt.ylim([-8,8])
plt.show()
target = interact(Robot_Simulator, q1=(-180,180), q2=(-180,180));
✅ **QUESTION:** Move the above robot so that the end effector is "gripping" the target (yellow/orangeish star). Notice that there is more than one point in the "joint space" that gives the same answer. This is the reverse Kinematic problem (which is harder). We know the point we want but we need to find the joints that put the robot at that point.
Put your answer to the above question here.
✅ **DO THIS:** The code in the following cell is cut and pasted from above. Modify the code to add a third Joint to the robot.
from ipywidgets import interact
def Robot_Simulator(q1=0,q2=-0):
a1 = q1/180 * np.pi
a2 = q2/180 * np.pi
#####Start your code here #####
#####End of your code here#####
d1 = 0.5
d2 = 3
de = 3
#####Start your code here #####
#####End of your code here#####
target = np.matrix([-3,2, 1])
print(target)
pe = np.matrix([[1, 0.5, 1],[0,0.5,1],[0,-0.5, 1],[1,-0.5, 1],[0,-0.5, 1],[0,0, 1]]).T
Je = np.matrix([[1, 0, de],
[0, 1, 0],
[0,0,1]])
p = np.concatenate( ( Je*pe, np.matrix([0,0,1]).T), axis=1 )
#####Start your code here #####
#####End of your code here#####
J2 = np.matrix([[np.cos(a2), -np.sin(a2), 0],
[np.sin(a2), np.cos(a2), d2],
[0,0,1]])
p = np.concatenate( ( J2*p, np.matrix([0,0,1]).T), axis=1 )
J1 = np.matrix([[np.cos(a1), -np.sin(a1), 0],
[np.sin(a1), np.cos(a1), d1],
[0,0,1]])
p = np.concatenate( ( J1*p, np.matrix([0,0,1]).T), axis=1 )
plt.scatter(p[0,:].tolist()[0],p[1,:].tolist()[0], s=20, facecolors='none', edgecolors='r')
plt.scatter(0,0, s=20, facecolors='r', edgecolors='r')
plt.plot(p[0,:].tolist()[0],p[1,:].tolist()[0])
plt.plot(target[0,0], target[0,1],'*')
plt.axis('scaled')
plt.xlim([-8,8])
plt.ylim([-8,8])
plt.show()
target = interact(Robot_Simulator, q1=(-180,180), q2=(-180,180));
✅ **QUESTION:** Do the reverse Kinematics again, and find three angles that place the robot on the star.
Put your answer to the above question here.
3. Assignment wrap-up¶
Please fill out the form that appears when you run the code below. You must completely fill this out in order to receive credit for the assignment!
If you have trouble with the embedded form, please make sure you log on with your MSU google account at googleapps.msu.edu and then click on the direct link above.
✅ **Assignment-Specific QUESTION:** What three angles did you find that place the robot on the star.
Put your answer to the above question here
✅ **QUESTION:** Summarize what you did in this assignment.
Put your answer to the above question here
✅ **QUESTION:** What questions do you have, if any, about any of the topics discussed in this assignment after working through the jupyter notebook?
Put your answer to the above question here
✅ **QUESTION:** How well do you feel this assignment helped you to achieve a better understanding of the above mentioned topic(s)?
Put your answer to the above question here
✅ **QUESTION:** What was the most challenging part of this assignment for you?
Put your answer to the above question here
✅ **QUESTION:** What was the least challenging part of this assignment for you?
Put your answer to the above question here
✅ **QUESTION:** What kind of additional questions or support, if any, do you feel you need to have a better understanding of the content in this assignment?
Put your answer to the above question here
✅ **QUESTION:** Do you have any further questions or comments about this material, or anything else that's going on in class?
Put your answer to the above question here
✅ **QUESTION:** Approximately how long did this pre-class assignment take?
Put your answer to the above question here
from IPython.display import HTML
HTML(
"""
<iframe
src="https://cmse.msu.edu/cmse314-pc-survey"
width="100%"
height="1000px"
frameborder="0"
marginheight="0"
marginwidth="0">
Loading...
</iframe>
"""
)
Congratulations, we're done!¶
To get credits for this assignment, you must fill out and submit the above survey form on or before the assignment due date.
Course Resources:¶
Written by Dirk Colbry, Michigan State University
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.